Blog

How To Use A Cordless Hand Blender To Create Delicious Treats

A cordless hand blender is a great tool to use when you move around the kitchen a lot and don’t want to be constrained by a cord. We show you how to use one.

Blenders are a great addition to any kitchen. The idea of learning how to use a cordless hand blender may seem unnecessary, but it is definitely worth your while. They have the ability to create delicious treats and the versatility for easy storage. These appliances are mess free and easy to use, which makes them one of the most sought after tools on the market.

We have all encountered the problem of wanting to make something tasty for the family, but not really wanting to deal with dragging out that big bulky blender. If that were not bad enough, keeping track of the attachments is nearly impossible. Luckily, the new immersion blenders can help to alleviate all of those problems.

Cordless hand held blenders come in many shapes and different speeds. For those who wish to just mix up a few smoothies or a milkshake there are small, low speed models that are perfect for such things. A larger, more powerful mixer can be purchased for anyone who needs to use the kitchen tool to whip up a gourmet meal.

Tips and Techniques

The cordless rechargeable hand blender is a wonderful device and can be used for many kitchen tasks. However, not using the blender in a correct manner can have catastrophic consequences. If you don’t want to have your cabinets covered in food it is important to learn the correct use of this handy appliance.

The first thing is to simply make sure that the tool is put together correctly. There are not many steps in putting a blender together, but the few things that you need to do should be done right. Take a good look at the instructions and follow the steps precisely.

When using the instrument, always start out at a slow mixing speed and then slowly increase the speed as the chunks are mixed up. Starting out too high is one of the most common mistakes that people make. The only exception to this rule would be for those mixtures that are smooth to begin with, such as whipping cream or eggs.

Always cut food into small manageable pieces before attempting to blend them. Although these amazing mixers are powerful, the blades are easily bent if you are not careful. Hard vegetables or large nuts can all damage the tool.

Great Ideas

Once you have the cordless rechargeable hand blender put together, and have properly read all of the instructions, then it is time to whip up something yummy. The versatility of the tool allows for a wide range of preparations. Most come with a recipe manual, but anything that can be made with your old appliance can easily be modified to suit your new one.

Everyone loves a smoothie and making one can be simple. Simply chop up your fruit of choice such as strawberries or bananas. Fill a tall glass with a few cubes of ice, and add your fruit. Top this off with a bit of yogurt and blend. It is a great treat for after school and your kids won’t realize that they are having something good for them.

Learning how to use a cordless hand blender may sound a bit difficult, but don’t be intimidated. There are so many uses for this great kitchen tool that you won’t be able to live without it. From soup to drinks, they can all be made quickly and easily.

Vitamix 1709 CIA Professional Series

You know you’ve produced a pretty high level kitchen appliance when one of the most powerful and prestigious culinary schools found anywhere in the world not only backs you 100%, but also works in close collaboration with you to elevate and innovate your already amazing products – and that’s just what has happened here with the Vitamix CIA Professional Series.

Vitamix 1709 CIA Professional Series
Vitamix 1709 CIA Professional Series

Chosen as the only line of blenders that the Culinary Institute of America trusts with their students, if you’re serious about cooking – even in a home setting – then this is the type of machine you need. Built and constructed from only the highest quality materials with the latest and greatest tools and technologies – including a commercial level, restaurant grade powerful 2 horsepower motor that can blend just about anything you throw at it. Combine that build quality level with a 64 ounce capacity with the ability to chop, dice, mince, blend, puree, juice and grind just about anything under the sun and you’ve got the Vitamix CIA Professional Series.

When your major responsibility is to prepare the next generation of world class chefs, you need the tools that are going to get the job done perfectly each and every time – and though Vitamix had already established themselves as a major player in the blender world before this collaboration, things got measurable better when CIA came aboard. Insisting on a precision laser cut one piece blade (easier to maintain and structurally more stable), an incredibly high level and powerful motor that propels the blade at speeds upwards of 230 miles an hour, as well as BPA free shatter proof containers all packaged into an attractive and sanitary stainless steel body, the Vitamix CIA Professional Series is not your regular blender. While it may be considered overkill for some home kitchens, if you are looking to unlock the flavor of your foods or desire a tool that will literally never let you down, this is the best blender for you.

Final Rating

Usability: 8/10 Because it is designed as a chef’s greatest asset in the kitchen, the Vitamix CIA Professional Series has a bit of a learning curve and none of the “easy touch” features that some products offer at this price point.

Power: 10/10 Unmatched power – and not just because of the motors amazing capabilities, but also because everything from the internals of the engine to the blade that is being driven was designed to work seamlessly.

Value for the money: 9/10 More expensive than most, there is a select group of people that will be able to leverage the power this machine offers. But if you’re in the market for a tool like this, the price and value cannot be beat.

Build quality: 10/10 Designed and constructed to be the chef’s right hand throughout his or her career – built to last a lifetime.

Warranty: 7 years

Overall: 9/ 10

Solve Blender Problems Quickly and Easily

Blender repair is not hard. Many blender problems can be solved quickly and easily without an expensive trip to the store. Find out some easy fixes.

A blender is an essential tool for any household kitchen. They can be used to make food preparation easier and faster. They are most commonly used to make smoothies and ice cream treats, mix ingredients, make dips, or chop and puree food. You will want to take good care of this item to ensure that it has the longest possible life span, but occasionally it will malfunction and you will need to know a little about blender repair.

You should learn how to fix minor blender problems on your own, as taking it to a repair shop would likely cost you more in labor than the blender is worth. Very few small appliances are worth taking to a repair shop. Usually a problem is quite simple and easily fixed if you know what to look for. You may be tempted to immediately trash an appliance this small when it has an issue; however, take the time to try a few solutions in blender repair before you determine that this is a necessary step to take.

Leaky Gasket

The most common problem with modern day blenders occurs when there is a leak at the base of the jar top. This can pose a real problem, especially if you are working with liquids and foods with a runny consistency. Usually the reason for a leaky jar is the rubber gasket. Examine this part of the blender closely and search for tears or cracks. If you find even the smallest damaged spot on the gasket, this is most likely the problem and will make for an easy blender repair. You can purchase a new gasket at most home discount stores, appliance shops, or through our GoBlendIt.com Parts Store (coming soon).

Blade Issues

If it appears that the gasket is not damaged in any way, check the blades to ensure that they are properly installed and assembled. Look closely at the blade points to determine if they are bent or broken. The blade may be damaged, which would cause a leak. You can purchase and replace this part very simply as well.

Perhaps you turn the blender on and you realize that it is trying to operate, but the blades are not turning. In this case, something is probably clogging the blade area and hindering it from functioning properly. Take the entire blender apart and clean each individual part well before reassembling.

If it still is not running properly, turn the blades to see if they move easily. If it is difficult to turn, you can try soaking this part in soapy water overnight. This will help break up any particles that may be lodged in the blade crevices and help you to clean it out. After soaking, use a small brush to clean the blade part carefully. Rinse it with hot water and dry it. Use a little white grease to lubricate the blade shaft. If the blade is still not turning easily, it most likely will have to be replaced entirely.

Power Problems

If your blender is plugged into an outlet and still will not operate, it is always a good idea to check the outlet first to ensure that it is working. If there is no problem with your power source, there could be something wrong with the cord or the plug. Use a continuity tester to determine if the blenders cord needs to be replaced. If this check does not reveal a problem, the plug is most likely the faulty piece. This is relatively simple and inexpensive to fix.

Buttons Malfunctioning

Occasionally a few of the different functions or buttons on a blender will start being stubborn and refuse to work at all, while others seem fine. These types of blender problems may well be caused by food that is encrusted around the buttons. Many blender models will allow you to remove the label around the button area, which will give you the opportunity to do a thorough cleaning. Some blenders will also require that you remove a hex nut to reveal the lower housing area and access the buttons for easy blender repair. Use a small brush such as a toothbrush to clean thoroughly around them, and replace all the parts. You may be surprised to find that this is all that was necessary to fix the malfunctioning buttons and complete the blender repair. However, if they are still not working, you may need to consider a new blender.

Motor Failure

A failed motor is another common issue that may arise with a blender. This is so common because these motors are not designed for power, but for speed. Think back to the last time your blender was used. If you overloaded it with hard to process foods, this may have killed the motor. If you have tried all other methods of blender repair to no avail, you can be pretty sure that this is probably why the blender is not working, in which case you would be better off to find a new blender. At other times, the fuse cartridge could pose an issue. Try replacing the fuse to determine if this is the problem.

It is always a good idea to consider checking your owner’s manual and other papers that came with your blender. If it is not a very old appliance, it may still be under warranty. Even if the warranty is no longer valid, many times if you simply contact the company and ask, they will send a replacement part free of charge. If this does not solve the problem, and your blender has not had a long life, they may even replace it. You never know until you ask. Most companies want to keep satisfied customers and a good reputation and they will work to maintain that.

Many of these blender problems are most easily prevented by maintaining your blender properly each time it is used. Keeping it clean and free of food particles will help immensely in reducing and avoiding any issues that may arise. You should properly clean a blender after every single use. Fill the jar half full of soapy water and run it for a few seconds. Then run it with clean water to rinse. This will clean all the inner workings and help your blender run better for longer.

How Do I Replace The O Ring In My Blender?

If you’re blender is leaking, you may have a faulty blender gasket or o-ring. It’s easy and inexpensive to repair this part of your blender. We show you how.

Blenders are great pieces of kitchen equipment that you can use to make everything from pesto, to healthy smoothies, to margaritas and other frozen drinks. While, overall blenders are easy to care for, they do need some occasional maintenance. This article will answer the question, “How do I replace the O ring in my Blender?”

What is An O Ring?

First it is important to understand what the O ring is. The O ring is one of many gaskets or seals that blender manufacturers use to make blenders watertight while in operation, while still allowing the unit to be disassembled for cleaning. The O ring sits between the base of the pitcher and the blade ensemble, effectively sealing the pitcher and preventing liquid from escaping while the unit is in operation.

Since the blender gasket is made of rubber, over time it can wear out and become cracked. As such, it becomes less effective at sealing the pitcher and leaks may occur. While all gaskets will breakdown over time, there are some things you can do to extend their lives. For example, when washing your blender, wash the O-ring by hand, and not in the dishwasher, as the hot water from the dishwasher will damage the rubber overtime.

So, how will you know when to replace your O-ring? This is fairly simple. First, it is a good idea to visually inspect the gasket every time you wash your blender. If it starts looking cracked or worn, it may be time to replace it. Another sign that it may be time to replace the o-ring is if the base of your pitcher starts to leak when you try to use your blender.

How Do You Replace The O-Ring?

Fortunately replacing the O ring is very easy. First, you must find the blender gasket that is compatible with your blender model. This can be done by going to the manufacturer’s website and ordering online, or by going to your local hardware store. Just make sure to buy a gasket that is compatible with your particular blender model as not all gaskets are the same.

Once you have the new O ring, installation is easy. Simply unscrew the blade assembly from the bottom of the pitcher. Once you have done this, remove the old O-ring and slip in the new one. Then, screw everything back together. (Make sure you check the instruction sheet that comes with your new gasket, in some cases, depending on the model, you may need to soak the gasket in hot water first.) Your blender should now be as good as new!

If your blender continues to leak after you have replaced the O-ring, then you may have a problem with one of the internal gaskets in the base of the blender, or the motor housing. In this case, it is best that you take your blender to a repair shop, so that the motor housing can be disassembled and checked from problems.

By following the steps presented here, you can keep your blender in good working condition for many years to come.

How To Use A Handheld Blender To Beat Eggs

A handheld blender is great little tool to have in your kitchen. One of the many things you will find yourself using it for is to beat eggs. We show you how.

A handheld blender is very convenient and easy to use for cooking preparation for a huge variety of items. If you own one, you will recognize its value to anyone from the amateur cook to the gourmet chef. This hand tool is smaller in size than the traditional blender and much more convenient to use for small jobs. Here are some tips to help you know how to use a hand blender to beat eggs.

The first step is quite simple. Take your eggs and crack them into a bowl one at a time. You may wish to use a larger bowl than necessary to reduce the chance of making a mess while mixing. Throw the egg shells away and take the time to carefully examine the contents of the bowl and remove any pieces of shell that may have fallen into the egg!

Attach the beaters to your blender and plug it in. Try to locate an outlet that will allow your power cord to stay out of the way while you are mixing.

Place the mixer into the bowl of eggs. You will want to hold it at an angle of at least 20 or 30 degrees.

Turn the mixer on and continue holding it at an angle. It will do all the work for you! The mixing process will usually only take about one minute. You may need to use a spatula to scrape the sides of the bowl occasionally if you have a large number of eggs to beat; otherwise you will be done in a matter of seconds.

Once the eggs have been mixed well, turn the stick blender off and unplug it from the wall outlet. You can now remove the beaters from the hand piece of the mixer and clean them well before returning them to their proper place for storage.